Improvement of Air Quality in a Small Indoor Ice Arena by Effective Emission Control in Ice Resurfacers

ABSTRACT

The effectiveness of a new emission control system in the ice resurfacer was tested in an exhaust gas emission laboratory, and the improvement of the air quality in a small, enclosed ice arena was demonstrated in a 4.5-month follow-up study. The emission control system consisted of a lambda sensor-controlled fuel supply and a three-way metallic catalyst that were applied to a propane-fueled resurfacer. In the laboratory tests, the engine emissions of carbon monoxide (CO), hydrocarbons (HC), and nitrogen oxides (NO ) reduced simultaneously by 91, 90, and 96%, respectively. During the air quality follow-up the median 1-hour average nitrogen dioxide (N0₂) concentration inside the ice arena decreased from 430 ug/m³ (230ppb) to 58 ug/m³ (31 ppb), and that of CO decreased from 4.4 mg/m³ (3.8 ppm) to 1.5 mg/m³ (1.3 ppm). The new emission control system proved to be a feasible, reliable, and effective means to improve the indoor air quality in the ice arena. However, continuous mechanical ventilation was necessary during all business hours in order to achieve and maintain a fully acceptable air quality with this technology.     

Speciation and antimicrobial resistance of Enterococci isolated from recreational beaches in Malaysia

We report the first study on the occurrence of antibiotic-resistant enterococci in coastal bathing waters in Malaysia. One hundred and sixty-five enterococci isolates recovered from two popular recreational beaches in Malaysia were speciated and screened for antibiotic resistance to a total of eight antibiotics. Prevalence of Enterococcus faecalis and Enterococcus faecium was highest in both beaches. E. faecalis/E. faecium ratio was 0.384:1 and 0.375:1, respectively, for isolates from Port Dickson (PD) and Bagan Lalang (BL). Analysis of Fisher’s exact test showed that association of prevalence of E. faecalis and E. faecium with considered locations was not statistically significant (p?<?0.05). Chi-square test revealed significant differences (χ ²?=?82.630, df?=?20, p?<?0.001) in the frequency of occurrence of enterococci isolates from the considered sites. Resistance was highest to nalidixic acid (94.84 %) and least for chloramphenicol (8.38 %). One-way ANOVA using Tukey–Kramer multiple comparison test showed that resistance to ampicillin was higher in PD beach isolates than BL isolates and the difference was extremely statistically significant (p?<?0.0001). Frequency of occurrence of multiple antibiotic resistance (MAR) isolates were higher for PD beach water (64.29 %) as compared to BL beach water (13.51 %), while MAR indices ranged between 0.198 and 0.48. The results suggest that samples from Port Dickson may contain MAR bacteria and that this could be due to high-risk faecal contamination from sewage discharge pipes that drain into the sea water.     

Comprehensive River Water Quality Management by Simulation and Optimization Models

In this paper, the performance of water quality modeling is investigated in the analysis of the natural assimilative capacity (NAC) of a river system. The new data available, along with the appropriate integrated model, allow for the analysis of the NAC of the entire river. The integrated model developed here emphasized the implementation of the QUAL2E simulation model and the appropriate allocation of waste loads (optimization model) in a subtropical area. Simulations are calibrated and validated according to the data from the Water Quality and Flow Rate Monitoring Project using the QUAL2E model. On the basis of the optimal allocation model, the results of the NAC and allowable pollution loading in the Putzu River basin are discussed. The study provides a framework of the integrated model that can be used as a guideline to determine the NAC of subtropical rivers.     

Application of a weights-of-evidence method and GIS to regional groundwater productivity potential mapping

The aim of this study is to analyze the relationship among groundwater productivity data including specific capacity (SPC) and transmissivity (T) as well as its related hydrogeological factors in a bedrock aquifer, and subsequently, to produce the regional groundwater productivity potential (GPP) map for the area around Pohang City, Korea using a geographic information system (GIS) and a weights-of-evidence (WOE) model. All of the related factors, including topography, lineament, geology, forest, and soil data were collected and input into a spatial database. In addition, SPC and T data were collected from 83 and 81 well locations, respectively. Four dependent variables including SPC values of ≥6.25 m3/d/m (Case 1) and T values of ≥3.79 m2/d (Case 3) corresponding to a yield (Y) of ≥500 m3/d, and SPC values of ≥3.75 m3/d/m (Case 2) and T values of ≥2.61 m2/d (Case 4) corresponding to a Y of ≥300 m3/d were also input into a spatial database. The SPC and T data were randomly selected in an approximately 70:30 ratio to train and validate the WOE model. Tests of conditional independence were performed for the used factors. To assess the regional GPP for each dependent variable, W+ and W- of each factor's rating were overlaid spatially. The results of the analysis were validated using area under curve (AUC) analysis with the existing SPC and T data that were not used for the training of the model. The AUC of Cases 1, 2, 3 and 4 showed 0.7120, 0.6893, 0.6920, and 0.7098, respectively. In the case of the dependent variables, Case 1 had an accuracy of 71.20% (AUC: 0.7120), which is the best result produced in this analysis. Such information and the maps generated from it could be used for groundwater management, a practice related to groundwater resource exploration.     

Comparisons of human risk assessment models for heavy metal contamination within abandoned metal mine areas in Korea

Environmental Geochemistry and Health - This study was initiated to develop a model specialized to conduct human risk assessments (HRAs) of abandoned metal mine areas in Korea. The Korean guideline...     

Epilithic Community Metabolism as an Indicator of Impact and Recovery in Streams Affected by Acid Mine Drainage

We measured biomass and metabolism of epilithic communities on five dates in different seasons at four sites in a watershed that has received extensive restoration for acid mine drainage (AMD) through the construction of passive treatment systems. Chlorophyll a biomass and productivity directly corresponded to AMD stress from coal mining. The site downstream of extensive passive treatment had significantly greater biomass and gross primary productivity rates than the site receiving only untreated AMD, but values were below those for two reference sites, indicating incomplete recovery. The degree of difference in these metrics among sites varied seasonally, primarily related to differences in canopy cover changes, but the ranking of sites in terms of stress generally was consistent. Reference sites had a significantly greater chlorophyll a/pheophytin ratio than untreated and treated sites, also indicating AMD stressed the communities. Community respiration was less affected by AMD stress than productivity or chlorophyll a. Productivity measures are not widely used to assess AMD impacts, and have been shown to both increase and decrease with AMD stress. The elimination of herbivores in AMD-impacted streams can increase productivity in the benthic algal community. Our study found productivity decreased with increasing AMD stress. Although sites with AMD stress had reduced herbivore populations, light, nutrients and metal precipitates appear to have limited growth of AMD-tolerant algal taxa. Therefore, it appears changes in food web structure due to AMD stress had less of an effect on epilithic productivity than environmental conditions within the stream.     

High occurrence of BTEX around major industrial plants in Kaohsiung,Taiwan

The Houjing River, which flows by large industrial complexes in southwestern Taiwan, has been seriously polluted with benzene, toluene, ethylbenzene, and xylene (BTEX). Using Spearman’s analysis of BTEX concentrations measured at different sites along the river, we identified the main sources of this pollution to be the Dashe and Renwu Industrial Parks. Maximum concentrations of benzene and toluene (402 and 143.19 µg/L, respectively) were considerably higher than those reported in similar studies and regulatory limits. We compared these findings with those of positive matrix factorization (PMF) modelling. PMF also identified the two industrial parks as being sources of BTEX, most likely originating from petrochemical activities that occur there. This study can serve as an important reference for future watershed management and pollution control plans for Kaohsiung, the most industrialized city in Taiwan. PMF proved to be a reliable computer modelling program for source apportionment and environmental forensic studies.     

Effect of substrate feeding frequencies on the methane production and microbial communities of laboratory-scale anaerobic digestion reactors

Even though full-scale digesters have been designed based on laboratory-scale tests, the substrate feeding modes of laboratory-scale tests might be different from those of full-scale digesters. The effect of substrate feeding frequencies on the performance and microbial community of laboratory-scale anaerobic digestion reactors was investigated. Feeding frequencies of twice a day, once a day, and every two days were tested in three 2-L reactors with an organic loading rate of 0.5 g-glucose/L/day under mesophilic condition. According to the results of this study, all the reactors showed similar methane production rates and SCOD removal efficiencies after sufficient time of acclimation, but frequently feeding promoted more stable digestion. Although there was no significant difference in microbial diversities from pyrosequencing analyses, the changes of archaeal community composition were observed. The decrease in feeding frequency appeared to cause shifts from acetoclastic methanogens affiliated with Methanosaeta to H₂-utilizing methanogens. The increase of Methanosaeta at a frequently feeding might contribute to the stability of reactor operation. Since this study uses glucose as the substrate, there is still possibility of different results for more complex substrates, such as sludge, food waste, etc.